Mirrix Chloe 5" & 8" Loom Stand
Would you like to use your Mirrix Chloe 5" or 8" loom in an upright position rather than flat on a table or on your lap? This removable stand allows you to position the loom at a comfortable angle for weaving.
Designed specifically for the Chloe 5" and 8" looms, the stand attaches directly to the loom and includes one rear leg and two rubber bumpers to stabilize the bottom of the loom on your work surface.
At a glance
✔ Allows you to use the Chloe in an upright, angled position
✔ Compatible with Mirrix Chloe 5" and 8" looms
✔ Removable single-leg stand
✔ Two rubber bumpers stabilize the bottom of the loom
✔ Attaches directly to the loom
✔ Ideal for tabletop use
Why add the Chloe stand?
The Chloe 5" and 8" looms can be used horizontally on a table or on your lap. Adding the stand gives you another option: working with the loom upright and slightly angled.
This position keeps the weaving surface in front of you rather than requiring you to constantly look down. The stand remains simple and compact, preserving one of the Chloe's main advantages: its portability.
What can you do with it?
- use your Chloe 5" or 8" loom in an upright position;
- angle the loom on a table or other stable work surface;
- change your working position according to the project;
- remove the stand when you prefer to work flat or transport your loom.
Which model should you choose?
This stand is designed for the Chloe 5" and 8" looms. Both sizes use the same single-leg stand.
The Chloe 10" uses a different two-leg configuration. If you own the 10" model, choose the stand specifically designed for that loom.
Compatibility
| Loom | Compatible | Configuration |
|---|---|---|
| Chloe 5" | Yes | 1 leg |
| Chloe 8" | Yes | 1 leg |
| Chloe 10" | No – different stand required | 2 legs |
Our recommendations
Do you own both a Chloe 5" and a Chloe 8"?
The stand can be moved from one loom to the other, but Mirrix specifies that the rubber bumpers are adhesive and cannot be transferred once installed. You will therefore need additional rubber bumpers if you plan to use the same stand regularly with two looms.
Moving the stand also requires partially disassembling the Chloe to remove and reinstall the stand hardware. If you regularly use both looms in an upright position, having a stand for each loom may therefore be more convenient.
What's included
The Chloe 5" and 8" loom stand includes:
- 1 stand leg;
- 2 hex nuts;
- 2 washers;
- 2 rubber bumpers.
Chloe loom not included.
Technical specifications
- Manufacturer: Mirrix
- Product: Chloe Loom Stand
- Type: removable stand for tapestry and bead loom
- Compatibility: Mirrix Chloe 5" and Chloe 8"
- Number of legs: 1
- Working position: upright and angled
- Installation: attaches directly to the loom
- Bumpers: 2 adhesive rubber bumpers
Installation and use
The stand attaches directly to the Chloe using the included hardware. The two rubber bumpers adhere to the bottom of the loom to help stabilize it on the work surface.
Mirrix specifies that the loom must be partially disassembled to install or remove the stand hardware. Because the rubber bumpers are adhesive, they remain attached to the loom once installed.
Why we love it
The Chloe's compact size and portability are among its greatest strengths, but working continuously with a small loom lying flat does not suit everyone.
This stand provides a simple solution by allowing you to raise and angle the Chloe without turning this compact portable loom into a bulky setup. You retain the Chloe's simplicity while gaining another comfortable working position.
Explore more
Chloe Sett Combs Weaving Accessories
Frequently asked questions
Does the same stand fit both the Chloe 5" and 8"?
Yes. The single-leg stand is compatible with both loom sizes.
Does this stand fit the Chloe 10"?
No. The Chloe 10" uses a different stand with two legs.
Can I move the stand from one Chloe loom to another?
Yes, but the rubber bumpers are adhesive and cannot be transferred. The loom must also be partially disassembled to remove and reinstall the stand hardware. Additional rubber bumpers are therefore required if you plan to use the stand with more than one loom.
What happens if the stand is not in stock?
Some Mirrix products are available immediately from Tisse et File, while others are ordered as needed. For an item that needs to be ordered, please allow approximately 2 to 3 weeks.