Louët
Filters
- Accessoires pour métiers à tisser (1)
- Bag (2)
- bobbin (1)
- bobbin bearing (2)
- bobbin rack (1)
- bobbin winder (1)
- carder (1)
- carding combs (1)
- connector (2)
- David 3 Floor weaving loom (1)
- David 3 floor weaving loom (1)
- Delta floor loom warping (1)
- Delta weaving loom (1)
- drum carder (1)
- electric drum carder (1)
- floor loom accessories (1)
- Floor weaving loom (1)
- Floor weaving loom accessories (4)
- floor weaving loom accessories (1)
- flyer (2)
- footman (1)
- Footman bolt (1)
- Footman to wheel connector w/ ring - Louët (1)
- hand carders (3)
- Louët Inkle Loom (1)
- Mechanical dobby for Megado (1)
- Métiers à tapisserie (1)
- Métiers à tisser mécaniques (1)
- Rouet (1)
- Second warp beam (1)
- shuttle (2)
- spinde (1)
- Spindle (2)
- spinning wheel (5)
- Spinning Wheel (1)
- Spinning wheel (1)
- spinning wheel accessories (3)
- spinning wheel bobbin (4)
- spinning wheel Driveband (3)
- table loom (1)
- Table loom accessories (1)
- table loom accessories (1)
- Table weaving loom (1)
- tapestry frame (1)
- tension box (1)
- warping mill (1)
- weaving accessories (2)
- Weaving loom (1)
- weaving loom accesories (1)
- weaving loom accessories (1)
- weaving loom bench (3)
- weaving shuttle (1)
- Weavng loom stand (1)
- yard counter (1)
Wooden warping stick - Louet
LouëtWooden warping sticks. Set of 16.
Bench for the Octado Louet Looms
LouëtThis Louet bench is suitable for the Octado loom. The bench, made of lacquered beech, is height adjustable from 23.5” to 27.5”. This bench is shipp...
View full detailsBench for the Delta and Megado Louet Looms
LouëtThis Louët bench is height-adjustable for Delta and Megado looms.The bench, in varnished beech, is adjustable from 23.5 in. to 27.5 in.This bench i...
View full detailsJane, David, Spring, Magic Dobby looms Bench
LouëtThis Louet bench is suitable for the Jane, Klik, Kombo, Magic Dobby, David and Spring looms. The bench, made of lacquered beech, is 57 cm high. It ...
View full detailsGeneric footman - complete - Louët
LouëtInclude footman, connector and footman to wheel connector with ring. Doesn't fit the S90 nor the Victoria (S95)
Bobbin IrT - High speed - Louët
LouëtThe high speed bobbin for all our Irish tension (bobbin driven) spinning wheels, except the S70, S71 and S90. The slot in the shaft allows you to e...
View full detailsBobbin IrT bulky/art yarn
LouëtThis bobbin will fit with older wheels whose original flyer was a bulky flyer. The Bulky bobbin fits well with current Bulky bobbin and Art yarn fl...
View full detailsBobbin ScT standard - Victoria S95, S10C et Julia S11 - Louët
LouëtStandard bobbin for the following Louet Scotch tension (flyer driven) Spinning wheels: S10C with Scotch Tension Mother of all S11 Julia S95 Victor...
View full detailsBobbin IrT standard - Louët
LouëtThis is the standard lacquered bobbin for all Louët Irish Tension wheels. This bobbin can be used for older wheels too - S10, S51, S20, S60, S70, S...
View full detailsBobbin for Louët bobbin rack
LouëtBobbin for Louët bobbin rack.
Louet Warp Tension Regulator
LouëtThe warp tension regulator (often call a tension box) is used with the Sectional Warp Beam and is adjustable to fit any Louet floor loom back beam.
Footman Bolt Assembly - Louët
LouëtFootman bolt assembly S10 pre S10C, S7X series, S15, S51(S0131)
Lisa frame looms
LouëtLisa frame loom is available in 4 sizes. The smallest one is perfect for an introduction to the World of Weaving and comes with a flat shuttl...
View full detailsAdditional shaft for Erica 30 or Erica 50 looms
LouëtThis extension kit contains all the hardware needed to add an extra shaft to the Erica 30 craft. This looms can have a maximum of 4 shafts.
Hand bobbin winder
LouetLouet's hand bobbin winder attaches easily to a table top, or even the side or shelf of your loom. The winder has an easily removable shaft for r...
View full detailsPirns for the fly shuttle - Louet
LouëtAdditional pirns for the Louët flying shuttle.Set of 5 cans.
Bobbin rack with 32 Bobbins - Louët
LouëtThe spool rack is essential for sectional warping and can be used for different other studio tasks. The Louet bobbin rack can hold up to thirty-two...
View full detailsLouët Hand cards - 110 tpi
LouëtLouët hand cards are made from European basswood.They are lightweight. Their backs are slightly curved and their handles are ergonomically designed...
View full detailsLouët Hand cards - 46 tpi
LouëtLouët hand cards are made from European basswood.They are lightweight. Their backs are slightly curved and their handles are ergonomically designed...
View full detailsLouët Hand cards - 72 tpi
LouëtLouët hand cards are made from European basswood.They are lightweight. Their backs are slightly curved and their handles are ergonomically designed...
View full detailsLouët Electric XL Drum carder
LouëtThe electric drum carder XL is equipped with a powerful built-in 370 W motor (230 Volt -50 Hz), which drives the big drum with a geared V-belt syst...
View full detailsDrum carder Junior - Louët
LouëtWith its near 4 inch width, the Louët Junior carder is particularly suitable for carding fleeces for spinning or for small felting projects. ...
View full detailsDrum carder Standard - Louët
LouëtThe Louët Standard carder is a workhorse. With a width of 7 1/2 inches, fleeces of up to approx. 80 grams can be carded. Mixing colors and fibers i...
View full detailsCounter for warp tension regulator - Louët
LouëtThis accessory to the Louet warp tension regulator is used to measure the warp. The tension regulator also called tension box is used with sectiona...
View full details